menu
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

CTC Tea Machine Price in India: What Drives the Cost

A single CTC machine in India is listed at roughly ₹3.5 lakh to ₹4 lakh, while complete lines run from about ₹7.6 lakh to ₹27 lakh depending on capacity. The gap exists because “CTC machine” can mean one roller unit or an entire line, so compare scope before you compare rupees.

The figures below come from public listings and project reports. They are indicative, not quotes, and several are undated, so treat them as a budgeting guide only.

Typical CTC Machine Price Ranges in India

What is listed Listed price Source
CTC machine, Coimbatore ₹3,50,000 + 18% GST = ₹4,13,000 TradeIndia listing
Crystal Cut CTC machine About ₹4,00,000 per piece Coimbatore supplier page
Semi-automatic CTC line ₹7,59,990 TradeIndia listing
600 kg/hr CTC processing machines ₹12,00,000 IndiaMART listing
1,000 kg/hr CTC processing plant ₹27,00,000 IndiaMART directory

These listings are not like for like. Capacity, cuts, automation and scope differ, and some pages show only a placeholder price. Use them to frame a range, then request a quote for your capacity.

What a CTC Machine Actually Includes

The CTC machine is one step in a longer process: withering, green leaf shifting, reconditioning, rolling, fermentation, drying, grading and packing, as outlined by UPASI. The standard machine has two contra-rotating toothed rollers of 8 inches (20.3 cm), and leaf passes through four or five machines in tandem.

So a line price may include a rotorvane, several CTC cuts, fermenting, a dryer and sorters, while a machine price covers only the rollers and drive. Our CTC tea machinery range is built as matched stages, because rotorvane and shredder output should match CTC and dryer capacity, as UPASI notes.

Cost Drivers Behind the Price

  1. Capacity and number of cuts. More kg/hr and more cuts in tandem mean more machines and larger drives.
  2. Roller size and quality. Listings mention 8 inch rollers as standard and 13 inch on some models. Sharpening precision decides quality, since worn teeth mean good CTC cannot be made.
  3. Automation. Controls for feeding, discharge and drying add cost but cut labour and waste. See our automation options.
  4. Build quality. Material, gearbox and motors matter. A listed Kaizen Nova page cites a heavy-duty build, reduced conveyor slope and an induction-hardened gearbox as examples.
  5. Service and spares. New or used, the supplier’s after-sales support affects lifetime cost more than the sticker price.

Costs Beyond the Sticker Price

Only one listing above shows GST, at 18%. Budget separately for freight, installation, civil works, power load, boilers and steam fittings. Roller recutting is a recurring cost, so ask how often it is needed and who does it.

For a full view, see our guide to the cost of setting up a tea factory.

Whole-Factory Budgets by Scale

The Tea Board defines micro factories as up to 200 kg/day and mini factories as up to 500 kg/day, per a model project report. That document is old, so confirm current rules.

  • Small unit (150 to 200 kg/day finished tea): at least ₹22 lakh, per Niir. Its rolling set is ₹4.5 to 9 lakh and the dryer ₹2.8 to 5.5 lakh.
  • Mid-scale unit (400 kg/day): ₹40 to 45 lakh, same source.
  • Packing included: a Niir project report shows a 1,100 kg/day unit at ₹217.46 lakh, with machinery at ₹102 lakh.
  • Older mini-factory model: plant and equipment at ₹40 lakh and total fixed capital of ₹47.4 lakh, per Teamech. It is undated, so verify before quoting.

Smaller growers can look at our mini tea processing lines.

Subsidies and Finance

The same model report notes a 40% Tea Board subsidy on plant and machinery. It is dated material, so check the current scheme with the Tea Board and your bank before putting it in a project report.

Final Thoughts

A fair comparison starts with scope. Ask each supplier for the capacity in kg/hr, number of cuts, roller size, automation, spares, GST, freight and commissioning in writing. Then compare the total installed cost, not the headline figure.

Frequently asked questions

How much does a CTC tea machine cost in India?

Listings show a single CTC machine at about ₹3.5 lakh to ₹4 lakh before or including GST. Complete lines are listed from about ₹7.6 lakh to ₹27 lakh depending on capacity. These are indicative public figures, not quotes.

Does the machine price include GST, installation and freight?

Usually not. Only one listing reviewed shows GST at 18%. Ask for a written quote that separates machinery, tax, freight, installation and commissioning.

Is there a subsidy for a mini CTC tea factory?

A model project report mentions a 40% Tea Board subsidy on plant and machinery for micro and mini factories. The document is old, so confirm the current scheme before relying on it.

Why do CTC machine prices vary so much?

Listings mix single machines, semi-automatic lines and full plants. Capacity, number of cuts, roller size, automation and build quality all change the price.

Contact Details

Corporate Office